Adding a Receipt Printer & Cash Drawer
Connect a USB ESC/POS receipt printer and RJ11/RJ12 cash drawer, configure receipt width and printing rules in Basket POS, and troubleshoot common printer and drawer issues.
- Required mode
- Direct USB ESC/POS Printer + Cash Drawer via Printer DK (RJ11/RJ12) Port
- Where in Basket POS
- Settings → Hardware → Receipt Printer & Settings → Receipt
- Applies to
- Seiko Instruments RP-F10 (Vendor ID 0x0619) · Compatible USB ESC/POS Thermal Printers · 24V RJ11/RJ12 Cash Drawers · Basket POS
Before you start
- A supported USB thermal receipt printer (such as the Seiko Instruments RP-F10) with its external AC power adapter and USB cable.
- 80mm (3-1/8") thermal receipt paper roll (or 58mm roll if using a narrow printer).
- A 24V cash drawer with an RJ11/RJ12 drawer-kick (DK) cable.
How the receipt printer and cash drawer work together
Basket POS prints directly over USB using native ESC/POS commands—no third-party print spooler app is required. The cash drawer plugs into the receipt printer’s DK (Drawer Kick) port rather than the tablet, so Basket POS triggers the drawer solenoid through the selected USB receipt printer.
- Printer connection
Direct USB (ESC/POS)
Seiko RP-F10 (Vendor ID 0x0619) and compatible USB ESC/POS printers.
- Cash drawer connection
RJ11 / RJ12 DK (Drawer Kick) port on printer
Uses standard 24V ESC/POS drawer kick (ESC p). Receipt Printer must be configured in Settings → Hardware for the drawer to open.
- Default receipt width
46 characters (80mm paper)
Adjust under Settings → Hardware → Receipt Width (20–80 characters; use ~32 for 58mm paper).
- Receipt behavior & layout
Settings → Receipt
Configure print prompt mode, English/French language, decline/cancel receipts, and drag-and-drop custom fields.
Step-by-step setup
- 1
Connect power, USB, and the cash drawer cable
Wire the printer and cash drawer before configuring Basket POS.
- Plug the printer’s AC power adapter into the printer and wall outlet, then connect its USB cable to the Basket POS terminal.
- Connect the cash drawer’s RJ11/RJ12 cable to the port labeled DK or Cash Drawer on the back/bottom of the receipt printer. Ensure the Printer-labeled end is at the printer and the Drawer-labeled end is at the drawer.
- Turn the cash drawer’s physical front key lock to the vertical / unlocked (online) position.
Never plug the cash drawer into an Ethernet (LAN) port
An RJ11/RJ12 drawer cable physically fits inside a wider RJ45 Ethernet port on some printers and hubs. Plugging into Ethernet will prevent the drawer from opening and can damage the port.
- 2
Load thermal paper and power on the printer
Ensure paper feeds cleanly with the heat-sensitive side facing the print head.
- Open the printer cover and drop in an 80mm thermal paper roll so the paper feeds from the bottom/outside toward the print head.
- Pull a small tail of paper past the cutter and snap the cover shut.
- Turn the printer power switch ON and confirm the status LED is solid (no red paper-out or cover-open indicator).
- 3
Select the printer in Basket POS Hardware settings
Assign the USB printer to this lane so both printing and drawer kicks work.
- Open Basket POS and go to Settings → Hardware.
- Tap Receipt Printer and select your printer (e.g., Seiko Instruments RP-F10).
- Confirm Receipt Width (characters) is set to 46 for standard 80mm thermal paper (adjust if using narrower rolls).
- Tap Save in the top-right corner.
- 4
Configure receipt prompts and layout (optional)
Tailor when receipts print and what appears on them.
- In Settings → Receipt, choose Prompt for receipt: Always Print Receipt, Prompt Cashier, Prompt Customer, or Never Print Receipt.
- Set Receipt language (English or French) and toggle Print Receipt on Decline or Print Receipt on Canceled Transaction as needed.
- Tap Customize Receipt to drag-and-drop receipt sections, add store header/footer text, or include custom barcodes and QR codes.
- Tap Save.
- 5
Grant USB permission and test both printer and drawer
Trigger a drawer kick and test print from the Register screen.
- Return to Register and tap Open Cash Drawer from the action bar (or complete a test cash transaction).
- When Android prompts for USB permission for the printer, check Always open / Use by default for this USB device and tap OK.
- Verify the cash drawer pops open immediately and the receipt prints clearly with your store header, items, and Transaction QR code.
Verify your setup
- Tap Open Cash Drawer on the Register screen and verify the drawer opens cleanly.
- Reprint a recent receipt (or ring a test item) and confirm text alignment, store logo, and Transaction QR code print sharply.
- Confirm the auto-cutter cleanly cuts the bottom of the receipt without jamming.
Troubleshooting
If the hardware does not behave as expected, match what you are seeing below:
Printer does not appear in the Settings → Hardware dropdown
Likely cause
- The printer is powered off or the USB cable is loose.
- The USB cable is plugged into a port or hub without data connectivity.
How to fix
- 1.Confirm the printer’s power switch is ON and its power LED is lit.
- 2.Unplug the USB cable from both ends, plug it firmly back in, and reopen Settings → Hardware.
Receipts print normally, but the cash drawer will not open
Likely cause
- The RJ11/RJ12 cable is plugged into the printer’s LAN/Ethernet port instead of the DK (Cash Drawer) port.
- The physical key lock on the front of the cash drawer is locked.
- The drawer kick cable is reversed or incompatible with Epson/Seiko 24V pinout.
- No Receipt Printer is saved in Settings → Hardware.
How to fix
- 1.Move the RJ11/RJ12 cable to the port labeled DK / Cash Drawer on the printer.
- 2.Turn the cash drawer’s front key to the unlocked (vertical) position.
- 3.Verify the cable ends match ("Printer" at the printer, "Drawer" at the drawer) and snap in firmly.
- 4.Open Settings → Hardware, confirm your Receipt Printer is selected, tap Save, and test Open Cash Drawer again.
Printer feeds paper and cuts, but the receipt is completely blank
Likely cause
- The thermal paper roll is loaded upside down.
- Non-thermal (plain bond) paper was loaded by mistake.
How to fix
- 1.Open the cover, flip the thermal paper roll over so the coated thermal side faces the print head, and close the cover.
- 2.Quick check: scratch the paper lightly with a fingernail—the side that turns dark gray/black is the printable thermal side.
Prices wrap to a new line or text is cut off on the right edge
Likely cause
- Receipt Width (characters) in Settings → Hardware does not match the installed paper width.
How to fix
- 1.Open Settings → Hardware → Receipt Width (characters).
- 2.Set to 46 for standard 80mm rolls (or reduce to 32 for 58mm rolls) and tap Save.
Printing or drawer kick stops working after a tablet reboot
Likely cause
- Android did not persist USB device permission, or another printing app claimed the USB device.
How to fix
- 1.Tap Open Cash Drawer or Reprint Receipt and accept the Android USB permission dialog with "Use by default" checked.
- 2.If no prompt appears, unplug the printer’s USB cable for 3 seconds and plug it back in.
Related hardware guides
Hardware setup
Adding a Scanner Scale (Datalogic & Zebra)
Connect Datalogic Magellan or Zebra MP-series combo scanner scales using USB-OEM mode, configure lb/kg units and Type 2 pricing in Basket POS, and resolve weight or scan issues.
Hardware setup
Adding a Hand Scanner (HID Mode)
Configure a wired or cordless handheld scanner in HID Keyboard Wedge mode with an Enter suffix so it works across Register, ID checks, Price Check, Transactions, and Online Orders.